Weidmuller WAVE Control: VMA Vac Voltage-Monitoring Module - Manual (Page 7)

14
5. Electrical connection
Warning! For applications with high isolation voltages, take measures to
prevent accidental contact and make sure that there is
sufficient distance or insulation between adjacent devices!
Generally, ferrules with plastic collars are to be used.
5.1 Power supply
approx. 1 W
18…30 Vdc
Voltage supply via cross-connections. Operating carrying capacity of
cross-connection # 2 A (see Cat. No. position 7).
Terminal assignments
1 Input OV - reference potential
2 30 Vac
3 70 Vac
4 130 Vac
5 250 Vac
6 450 Vac
7 Voltage output 0...10 V
8 Current output 0/4...20mA
9 Output O V- reference potential GND 1
10 Power supply + 24 Vdc (cross-connected)
11 Power supply OV GND 2 (cross-connected)
12 not assigned
Wire cross-section max. 2.5 mm 2
Multi-wire conncection max. 1 mm 2
(two wires with same cross-section)
7 8
10
1 2 3
9
11 12
4 5 6