Weidmuller HS01 Heat Sink (Ultra SlimPak series) - Manual (Page 2)

Installation
Specifications
Material
Anodized
Ordering Information
Heat Sink
The HS01 heat sink mounts tightly between Ultra SlimPaks and the DIN mounting rail. Simply fit the HS01
heat sink to the Ultra SlimPak as shown above, then snap both onto the rail together.
To remove the Ultra SlimPak without removing the heat sink or combi-foot from the rail, slide the Ultra
SlimPak up (from the vertical position), approximately 0.75", off the combi-foot and remove the module.
Aluminum Alloy 5052H32, 0.063" thick
Black, MIL-A-8625
Cat.No.
HS01-A
Specifications subject to change without notice. 99990023 - 8/98 Printed in Canada