Wasp Barcode MobileAsset - Manual (Page 15)

25 26
Installation & Setup MobileAsset | Quick Start Guide
For the client-only machine, refer to the Client Only section below.
2 Server with Client and 4 Clients
When selecting the MobileAsset database server configuration shown
below, leave the check in the Client Tools option and the Database
option. The database server and one client will be installed on this
machine.
Remember that there are only five client licenses, so you might want to
deselect the Client Tools component if you would rather deploy all of your
client licenses on machines other than this database server machine. If you
deselect Database here, you will not be installing the server.
Minimum Client Configuration Recommended Client Configuration
750 MHz or faster processor 2.0+ GHz
1 GB of RAM 4 GB of RAM
10 GB of disk space 60 GB of disk space
DVD drive (for installation only)
1024 x 768 pixel display, 256 colors minimum
32-bit or 64 bit version of: Windows 8, Windows 7 Professional,
Windows Server 2003, 2008, or 2012 (recommended)
NOTE:
• MobileAsset server installation on Microsoft ® Windows ® 2000,
98SE, NT or ME machines are not supported.
• MobileAsset clients will not work without connecting to a running
MobileAsset server.
• The database server will run automatically every time the computer
is rebooted.
1 Server and 5 Clients
When selecting the MobileAsset database server configuration shown
below, uncheck the Client Tools option on the Select Installation Type
screen, and only the database server will be installed on this machine.