Baldor MN1940 - Manual (Page 15)

www.baldormotion.com
Basic Installation 3-5 MN1940
3.1.2.3 Dimensions - DSMS34
All dimensions shown as
mm (inches)
L MAX
LMAX2
4 x Ш5.5 (0.22)
37 (1.46)
25 (0.98)
13 (0.51)
Ш14
(0.55)
94.7
(3.73)
2 (0.08)
10 (0.39)
Ш73
(2.87)
69.6 (2.74)
86.1 (3.39)
18.6 (0.73)
31.8 (1.25)
Flying leads
305 (12)
Motor
Stack
Dimensions
(mm / inches)
Weight
L
MAX
L
MAX2
(with control knob)
kg / lb
DSMS34F-1B 94.2 (3.71) 112.3 (4.42) 1.9 (4.19)
DSMS34F-2B 114.3 (4.50) 132.3 (5.21) 2.5 (5.5)
DSMS34F-3B 154.2 (6.07) 172.2 (6.78) 4.0 (8.8)
Figure 4 - Package dimensions - DSMS34
3.1.2.4 Securing DSM cables
Some applications may require that the DSM moves with the axis motion. If this is a
requirement of your application, the motor leads must be properly anchored. Secure the flying
leads to the motor body using adhesive cable clamps. This will prevent flexing and tugging
which can cause damage at critical connection points in the DSM electronics.
Do not bundle the logic leads together with the DSM power leads.