Vortex Optics RAZOR HD GEN II 3-18X50 RIFLESCOPE - Manual (Page 4)

7 6
RETICL E
r
iflescope
a
DjusTmenTs
Reticle Focus
Vortex Razor HD riflescopes use a fast focus eyepiece designed to quickly
and easily adjust the focus on the riflescope’s reticle.
To adjust the reticle focus:
1. Look through the riflescope at a blank
white wall or up at the sky.
2. Turn focus knob fully outward.
3. Slowly turn the eyepiece focus knob inward
until the reticle image is as crisp as possible.
When focusing, look at the reticle with short,
interrupted glances rather than an extended
stare.
Once this adjustment is complete, it will not
be necessary to re-focus every time you use the
riflescope. However, because your eyesight may change over time, you
should re-check this adjustment periodically.
Adjust the reticle focus.
Warning
Looking directly at the sun through a riflescope, or any optical
instrument, can cause severe and permanent damage to your eyesight.
Variable Power Adjustments
To change magnifications, turn the magnification ring to the desired
level.
External Rotation Indicator
The external indicator on the elevation turret provides quick visual
and tactile reference of the elevation turret’s rotational position. As
the turret enters the second turn of rotation, the indicator will extend
outward from the turret. On the third turn of rotation, the indicator
will be fully extended.
Adjust the magnification.
Note: Some combinations of rifle, base and rings may not allow a second
or third rotation of the elevation turret.
Turret in second
turn of rotation
(partially extended). Turret in first
turn of rotation
(not visible). Turret in third
turn of rotation
(fully extended).