Vigo VG06042B User Manual

Page 11

MODEL VG06042

K. APPLYING THE SILICONE

Apply clear silicone caulking to the inside between the wall and side seal strip. Repeat for
the other side [SEE FIG.11].

Apply clear silicone caulking to the inside between the floor and the fixed front panel.

Continue applying the silicone caulking around the turning hinge base mirrored to seal any
place that may cause leaking.

Apply clear silicone caulking to the inside between the floor and left threshold end cup, door
threshold, right threshold clip with hole and the bottom of side panel.

IMPORTANT

WAIT 24 HOURS BEFORE USING SHOWER

DO NOT ALLOW WATER TO DIRECTLY HIT DOOR SEAL STRIPS.

CLEANING INSTRUCTIONS FOR THE SHOWER CABIN AND DOOR PANEL

Use mild liquid household cleaners to keep metal surface bright and clean. Rinse well and

dry with a clean cloth.

Remove dust with a soft, damp cloth.

Use rubbing alcohol to clean and remove grease, oil, paint, and ink.

Accidental scratches or stains will rarely show. If they do show, they can be easily removed
with a liquid automobile polish.

IMPORTANT

Do NOT use abrasive cleaners, scrapers, metal brushes, or any item/products that would

scratch and/or dull surface.

Do NOT allow surface to come in contact with acetone (nail polish remover), dry cleaning

solution, lacquer thinner, gasoline, or any other similar product.

J. INSTALLING SCREW COVERS

Install screw covers (#24) to the unit. Please pay attention that there are three types of

covers. Type A is for structural arm (3pc) and left threshold clip with screw hole (1pc). Type

B is for turning hinges (6pc). Type C is for glass supports (8pc).

FIG.11