Unisteer 8050080 Power Mustang Shaft Kit 1979-1993 - Manual

pg. 1 655480
1979-1993 MUSTANG POWER STEERING SHAFT
INSTALLATION
# 8050080
Full refund will NOT be granted to any kits that are damaged,
scratched, or altered in any fashion.
KIT CONTENTS:
# Description Part Number Quantity
1 Column Insert 541830 1
2 “DD” Shaft w/Spline 542960 1
3 Joint, Spline X Spline (w/2 bolts & washers) 8050440 1
4 Joint, “DD” X Spline (w/2 bolts & washers) 8050240 1
INSTALLATION:
Remove stock steering shaft
1. Center front wheels and lock steering wheel. Turn ignition off (AIR BAGS CAN ACCIDENTALLY
BE DEPLOYED IF IGNITION IS LEFT ON).
2. Unbolt stock steering shaft from the steering column, and rack and pinion. Push the steering shaft
up toward the firewall until the lower steering coupler comes off the rack and pinion. If the shaft is
corroded and won’t come free, remove the rack and pinion assembly from the frame and then
remove shaft.