Unisteer 8011060-01 Chevy Impala Rack & Pinion Kit 1958-64 - Manual (Page 8)

pg. 8
655910
12. From under the vehicle install the outer tie rod ends into the steering arms. Install the supplied
washers over the stud on top of the steering arms and install the supplied nuts. Torque to 45 ft. lbs.
By eye align the front wheels somewhat so that you can drive the car to a shop to have a professional
align the vehicle.
Alignment Specs:
Toe: 1/16" for radial tires & 1/8" for bias ply
Camber: 0-1/4" positive (1/2" max)
Caster: +2° on both sides
If you have any questions or problems regarding this product please contact:
UNISTEER®
Performance Products
1555 Enterprise Parkway
Twinsburg OH 44087
800-338-9080
WWW.UNISTEER.COM
Last Revised 6/20/2014
Copyright © 2009 by Maval Manufacturing Corporation All rights reserved.
No part of these materials can be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying, recording or by any information storage and retrieval
system, with permission in writing from Maval Manufacturing Corporation.