Unisteer 8011540 Corvette Power Rack & Pinion Kit 1963-1982 - Manual (Page 4)

Page 4 656240
Note: For Steering Pump 8061080 & 8061090 Instructions, consult manual 657440.
Note: For Shaft Kit 8052090 Instructions, consult manual 656260
Note: For Shaft Kit 8052080 & 8052110 Instructions, consult manual 656270
1963-1982 Corvette Final Steps
6. Top off power steering fluid level in pump reservoir.
7. Start the car and let idle for 1 0 seconds, “do not turn wheel during this period”. Turn off vehicle. Top
off power steering fluid. Restart car, turn wheel slowly, lock to lock. Check fluid once more, top off if
needed.
8. Vehicle will need to be aligned properly after install.
If you have any questions or problems regarding this product please contact:
UNISTEER®
Performance Products
1555 Enterprise Parkway
Twinsburg OH 44087
800-338-9080
WWW.UNISTEER.COM
Last Revised 6/24/2014
Copyright © 2011 by Maval Manufacturing Corporation All rights reserved.
No part of these materials can be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying, recording or by any information storage and retrieval
system, without permission in writing from Maval Manufacturing Corporation.