Therma-Tru Doors Repair and Replacement - Manual (Page 30)

5.30 2014 SITE 5
Storm Door Strip Application
(Continuous Sill)
Apply Storm Door Adapter
First fasten base adapter strips using #10 x 2” screws for 4-9/16” jambs or #10 x 4” screws for 6-9/16”
jambs as shown.
Apply face adapter strips directly over base adaptors using 2-1/2” staples.
Caulk at head joints
Caulk at sill joints
#10 x 2” screws (4-5/8” jambs)
or
#10 x 4” screws (6-5/8” jambs)
Sill removed for clarity.
Base adapter
Face adapter
2-1/2” Staples