Therma-Tru Doors Repair and Replacement - Manual (Page 19)

Repair and
Replacement
SITE 5 2014 5.19
Mull Post Replacement
Install Sidelite Into Frame
Inswing
Outswing
Inswing - Install inactive fixed panel by
tilting bottom edge of panel so inactive
door bottom aligns with sill attachment
flange.
Attachment Flange
Mullion system shown
Mullion system shown
Shim
To ensure proper seal of inactive door bottom
against sill, shim head of inactive fixed panel.
Locate shims near corners and slide shims
between head jamb and inactive panel.
A putty knife may be required for this operation.
Careful not to damage face of panel.
Shim Inactive Fixed Panel
Install Sidelite Into Frame
,
Place sill end first, mating plastic bottom to
sill if necessary.
Use putty knife blade at top to aid insertion
of slab in frame.
Sidelite panels are nominally 1/16” narrower
than frame opening, for 1/32” clearance on
each side.