Thermalright Venomous X RT_1366_1156_775 - Manual (Page 2)

The Ultimate Cooling Solutions ! www.thermalright.com
Step 1:
1366
1156
775
Step 2:
Step 4: Step 5: Step 6:
Max. Min.
+ -
70 lbs 40 lbs
Step 7:
Installation Instructions:
Step 7：Installation completed.
Angled Wrench
Step 3:
Step 6：Insert a 12cm fan inside the fan holder and hook
the fan holder claws to the heatsink fins on both sides of
the heatsink. Make sure the claws are tightly grasped onto
the fins. Plug fan power cord in to the fan power outlet.
pressure adjusting
nob
Step 3：Apply a layer of Thermal Paste evenly to
the top of the cpu and to the bottom of the heatsink.
Step 1：Installing Backplate cap for 775 platform and adjusting the
screw pillars.
(1).When installing on the 775 platform,you need to install the backplate
cap into the square opening on the backplate, please take note of the
installation direction, with the hooked edge facing down.
(For 775 platform only)
(2). Apply the screw pillars to its identical mounting holes needed.
Step 4：Make the Pressure Adjustable mounting plate go
through the heatsink.
Step 5：
Step 2：Installing the Anchoring bracket mount,
Place the Multiple support backplate under the
motherboard,place the 4 white plastic washers over the
4 screw-threads and then secure it by tightening it with 4
pcs of screw pillars, place the anchoring bracket mount
on top of the 4 screw pillars, and then tightening the 4
pillars with the thumbscrew caps.