Thermalright VRM-R2 User Manual
Vrm - r2 installation, Component
VRM - R2 installation
Exploded View
Component
VRM-R2 heatsink
Washer
M3 Screw
VRM-R2 heatsink
1
M3 Screw
2
Washer
2
Thermal Pad
2
80mm Fan Clip (left)
1
80mm Fan Clip (right)
1
Step 1:Apply thermal padding to the
heatsink as depicted in the illustration.
Step 2:Align the holes from the heatsink
to the GPU socket mounting holes.
Step 3:Insert washers from the back
side of the VGA card through the M3
screws and secure the heatsink in place
by tightening on the M3 screws.
Step 4:Installation completed.
Fan Installation
80mm X 25mm Fan Installation:
80mm X 15mm Fan Installation: