Barco R9001769 - Manual (Page 44)

10-4
Installation Mode
5976069 BARCOREALITY 6400 21082000
Select with or
then
to return.
Select with or
then
to return.
800 Peripheral
Output module selection.
When a RCVDS05 is connected to the projector, the type of output
module of this RCVDS05 has to be defined in the 800 peripheral
menu.
The type of output module can be :
- standard output module or
- 5 cable output module.
To define the output module :
1 Push the cursor key é or ê to highlight '800 Peripheral'.
2 Press ENTER to select.
3 Push the cursor key é or ê to highlight 'Output module'.
4 Press ENTER to toggle between 'Standard' or '5-cable'.
Infrared Communication.
When a peripheral is connected to the 'Comm Port', the communica-
tion can be in PPM or RC5.
The type of communication can be set to :
- PPM
- RC5
To define the communication :
1 Push the cursor key é or ê to highlight 'Infrared'.
2. Press ENTER to toggle between [PPM] or [RC5].
OSD color (On-Screen Display)
The highlighted items on the menus can be displayed in red, green or
yellow.
To change this color setting:
1 Push the cursor key é or ê to highlight 'OSD color'.
2 Press ENTER to select.
The OSD color menu will be displayed.
3 Push the cursor key é or ê to highlight a color.
4 Press ENTER to select.
Configuration
The configuration of the projector can be set up as follow :
1 Push the cursor key é or ê to highlight 'Configuration'.
2 Press ENTER to select.
The Configuration menu will be displayed.
For more information, see Projector configuration in chapter
4 : 'Installation Set Up'.
800 PERIPHERAL
OUTPUT MODULE [STANDARD]
INFRARED [PPM]
OSD COLOR
HIGHLIGHTED ITEM
RED
GREEN
YELLOW
Select with or
then
to return.
INSTALLATION
800 PERIPHERALS
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
SWITCHING MODE
more ...
Select with or
then
to return.
INSTALLATION
800 PERIPHERALS
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
SWITCHING MODE
more ...
INSTALLATION
800 PERIPHERALS
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
SWITCHING MODE
more ...