Barco R9001769 - Manual (Page 14)

Installation Set Up
4-1 5976069 BARCOREALITY 6400 21082000
4
INSTALLATION SET UP
Configuration
The projector can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling.
Front/Table
Front/Ceiling
Changing the configuration :
To change the configuration of the projector, proceed as follow :
Rear/Table
Rear/Ceiling
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with or
then
to return.
Select with or
then
to return.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
NO SIGNAL
LENS
Select with or
then
to return.
CONFIGURATION
FRONT/TABLE
FRONT/CEILING
REAR/TABLE
REAR/CEILING
1 Press ENTER to start up the adjustment mode.
2 Press the cursor key é or ê to select 'Installation'.
3 Press ENTER to display the Installation menu.
4 Press the cursor key é or ê to select 'Configuration'.
5 Press ENTER to display the Configuration menu. The actual installed configuration will be highlighted.
6 Press the cursor key é or ê to select the corresponding configuration.
7 Press Adjust to leave the adjustment mode.