Telematrix SP100 User Manual
Page 14
14
Message Waiting Selector
The SP100 supports either 90VDC neon
or low voltage LED message waiting
systems. Position the NEON/LED switch
to the desired position so that the tele-
phone is compatible with your PBX
message system.
Note: the phone is factory preset to the
“NEON” setting.
Ringer Volume Control
The switch is located at the back of the
telephone. The switch has HI/LOW/OFF
setting. Place the switch in the position
for the desired ring volume or off.
Note: The switch factory set to the
“HI” position.