Telematrix 9600 Series User Manual
Page 4
I
nstallation...
Caution Information -
•
Never install telephone or network wiring during a lightning storm.
• Never install telephone or Ethernet jacks in wet locations unless the jack is specically
designed for wet locations.
• Never touch uninstalled telephone wires or terminals unless the telephone line has
been disconnected at the network interface.
• Use caution when installing or modifying telephone and network lines.
• Be sure your power adaptor meets your regions requirements prior to installation.
Connecting the Line Cord - # 6 & # 49/50
Two line cords are provided 1-RJ45 & 1-RJ25. To install, simply plug one end of the
RJ45 cord into the modular jack at the top end of the base unit # 6 and the other end
into the RJ45 Phone Jack on the power adaptor # 50. Take other line cord and plug
into Line jack on power adaptor # 49, then plug other end into wall. Finish by plugging
power adaptor into normal wall outlet.
Be sure your power adaptor is specied for your region of the world prior to plugging
into the wall socket
Connecting to the HSIA Port - # 7a & 7b
The phone is equipped with PassPort™, a High Speed Internet Access port on the left
side of the base unit. This receptacle acts as a pass-through so that the guest may
connect their laptop into the hotel’s high speed internet system for maximum effeciency.
To connect - place the Ethernet cable from the wall into the RJ45 receptacle at the top
end of the base # 7a.
3
12
Version 12.03.08
6 7a
7b
Statement of Limited Warranty