Talos Security DRSDI1641 HD-SDI DVR Manual - Manual (Page 16)

SEARCH
15
▪ How to set ID
① Before setup the ID, Enter to the GENERAL SETUP and set the ID first. (Default is 0)
② While pressing and holding the ID button, enter the unit address of the DVR by two-digit.
③ If the unit address is a single digit, enter two digit number by adding the number 0 as the first digit.
( Example
– If the unit address is 1, the input value is 01.)
▪ A single remote controller can change ID from 0 to 19 and independently control up to 20 DVRs.
ID
RECORD
ROTATE
DISPLAY
MENU
ESC
LOCK(LOG-OUT)/ REPEAT
NUMBER
PTZ PRESET
PTZ IRIS
▲ Direction Key /Panorama Play
ENTER
▼ Direction Key /Smart Play
▶ Direction Key / Play
Fast Reverse Play/
PTZ
Fast Forward Play / PLAY
◀ Direction Key /
Reverse Play
3.3 Remote Controller
PAUSE
BACKUP
PTZ ZOOM
PTZ FOCUS