Barco R9001330 - Manual (Page 75)

Random Access Adjustment Mode
5975288 BARCOGRAPHICS 8200 110497
Random Access Adjustment Mode
5975288 BARCOGRAPHICS 8200 110497 11-10
11-10
Copy
To copy a selected file into a new file.
Use the control disk to select COPY and press
ENTER . The Copy
selection menu will be displayed.
Use the control disk to select a file name and press
ENTER to select.
The Copy menu will be displayed with the selected file name already
filled in in the 'From file name :' area and in the 'To file name :' area. Select with or
then
to return. COPY FILE
Filename Src Resolution
-----------------------------------------------------
pal .s01
1 675x278i
pal .c01 1 675x278i
secam .s03 3 675x278i
-----------------------------------------------------
Active file : pal.c50
Select with or
to accept
to return.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
COPY FILE
Frome file name :
xga_60.s03
To file name :
xga_60.c14
Select with or
Reprogram with or
or numeric keys
to confirm
to return
Press ENTER to select the separate characters. Push the control
disk to the right or to the left to select the desired character. Change
that characters by pushing the control disk up or down. Numeric
characters can be entered directly with numeric keys on the RCU.
Press
ENTER to confirm. The copied file is entered in the list of files.
Press EXIT to return to the Copy selection menu. No copies are
made.
Copy
To copy a selected file into a new file.
Use the control disk to select COPY and press
ENTER . The Copy
selection menu will be displayed.
Use the control disk to select a file name and press
ENTER to select.
The Copy menu will be displayed with the selected file name already
filled in in the 'From file name :' area and in the 'To file name :' area. Select with or
then
to return. COPY FILE
Filename Src Resolution
-----------------------------------------------------
pal .s01
1 675x278i
pal .c01 1 675x278i
secam .s03 3 675x278i
-----------------------------------------------------
Active file : pal.c50
Select with or
to accept
to return.
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
COPY FILE
Frome file name :
xga_60.s03
To file name :
xga_60.c14
Select with or
Reprogram with or
or numeric keys
to confirm
to return
Press ENTER to select the separate characters. Push the control
disk to the right or to the left to select the desired character. Change
that characters by pushing the control disk up or down. Numeric
characters can be entered directly with numeric keys on the RCU.
Press
ENTER to confirm. The copied file is entered in the list of files.
Press EXIT to return to the Copy selection menu. No copies are
made.