Sunnex HM2017-44 - Manual (Page 5)

Sunnex HM Light Service & Installation Manual 5
HM WALL BRACKET HOLE PATTERN
2.3 HM LIGHT Wall - Gooseneck Arm
(HM1000-37W)
1. Mount the light using four screws. There
are four holes on the universal mount.
2. Be sure transformer plug is not plugged
into power source at this time.
3. After universal mount is secured, plug in
the plug-in transformer to use the light.
HM Light Wall – Gooseneck Arm
2.4 HM LIGHT Ceiling (HM2017-44)
1. Securely fasten lamp down tube from ceiling. It is recommended that 6-5/16" diameter or larger
fasteners of the proper length for your individual application be used. Be sure down tube is securely
mounted to structural framework. Down tube should be mounted plumb and square to ceiling surface.
Universal
Joint