Summit SWC1875B User Manual

Page 10

ON/OFF Power

To turn the appliance ON or OFF, touch the

symbol and hold for 5 seconds.

NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.

LIGHT

Turn the interior light on and off with this switch.

Used to increase (warm) the set temperature by 1°C/1ºF.

DOWN

Used to decrease (cool) the set temperature by 1°C/1ºF.

Indicator Light

The indicator light is located at the right lower corner of the display. The indicator light will be on
when the multi-key function is selected. To perform the multi-key function, press and hold the first
key, then press the additional key(s) for at least 5 seconds and then release all the keys

ºF/ºC Selector

Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature
from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5
seconds.

Setting the Temperature Control

• You can set the temperature by touching the UP and DOWN symbols. When you push the two

buttons at the same time, the LED readout will show the original temperature set previously.
(The temperature preset at the factory is 54°F or 12°C.)

• The temperature you are setting will increase by one degree each time you touch the UP

symbol, and will decrease by one degree each time you touch the DOWN symbol.

• The range of the temperature control is from 41°F to 72°F.
• To view the set temperature at any time, touch the UP or DOWN symbol. The set temperature

will flash in the display window for 5 seconds. After 5 seconds, the temperature inside the unit
will reappear in the display window.

CONTROL PANEL for SWC1875B