Summit SBC590 User Manual
Page 13
12
REMOVING / REPLACING THE BASE GRILLE
Required Tools: Phillips screwdriver
To remove the base grille:
1. Open the beer cooler door.
2. Remove the two SCREWS with a Phillips screwdriver. Release and remove the base grille
from the cooler by pushing both TABS in toward the center.
To replace the base grille:
1. Open the cooler door.
2. Align both TABS into position, such that the base grille snaps into place.
3. Replace and tighten the two SCREWS.
Important information about moving your beer cooler
Your beer cooler is heavy. When moving the unit for cleaning or
maintenance, cover the floor with cardboard or hardboard to prevent
damaging your floor. You should always pull the unit straight out when
moving it. Do not wiggle or “walk” the cooler when trying to move it, as this
can cause floor damage.