Summit SBC590 User Manual
Page 12
11
use harsh cleaning tools such as paper towels or scouring pads, as these can scratch or
damage the surfaces of the refrigerator.
4. For stainless steel and painted metal exterior surfaces, use a clean sponge or soft cloth and
a mild detergent in warm water. DO NOT use abrasive or harsh cleaners, or cleaners
containing chlorine, as these can scratch or damage the material. Using a soft cloth, dry
thoroughly.
5. To help with removing odors, you can use a mixture of warm water and baking soda (2 tbs
to 1 qt [26 g to 0.95 L] of water) to wash the interior walls.
6. After cleaning, replace all of the parts that were removed from the beer cooler.
7. The condenser coils, located behind the base grille, should also be cleaned regularly. This
may be as often as every other month. Cleaning the condenser coils can help reduce how
much energy the cooler uses.
• Remove the base grille (see Removing / Replacing the Base Grill on page 12).
• When the condenser coils are dusty or dirty, use a vacuum cleaner with an extension
attachment.
• Replace the base grille.
8. After cleaning the beer cooler, plug in or reconnect power.
VACATION
If the appliance will be turned off prior to your departure, follow these steps.
1. Remove contents from the appliance.
2. Unplug the appliance.
3. Clean the appliance. See Cleaning the Beer Cooler on pages 10 - 11.
4. Prop the door open so that sufficient air can enter the beer cooler. Do so by taping a rubber
or wooden block to the top of the door. Allowing air to flow into the appliance prevents the
buildup of odor and mold.
MOVING THE BEER COOLER
Follow the instructions below to prepare your appliance when moving to a new location, such
as a new home.
1. Remove all contents from the beer cooler.
2. Unplug the cooler.
3. Clean, wipe, and dry the unit completely.
4. Take out all removable parts, wrap them, and tape them together securely so they don’t
shift and rattle during the move.
5. Tape the door shut and tape the power cord to the rear of the cooler.
WARNING:
Two or more people are required to move and/or install the appliance. Failure to do so
may cause back or other injury.