Blaupunkt CANBERRA RCM 85 - Manual (Page 6)

Canberra RCM 85
22
Tape operation:
TR1--PLAY - Side 1 (or 2)
MTL
- Metal
B - Dolby B-NR
CD changer operation (optional):
CD 05 - Disc number
T 02 - Title number
< Fast winding/PROG button
To switch to the other side of the
cassette tape:
Press both buttons simultaneously.
The display shows TR1-PLAY or TR2-PLAY.
FR : Fast rewind; stop by pressing FF.
FF : Fast forward; stop by pressing FR.
= SC/MIX
Radio operation
Scan (sampling all stations to be recei-
ved): Press SC/MIX briefly.
Preset Scan (sampling all stations
stored on the preset buttons): Press
SC/MIX for approximately 2 seconds.
Changer operation (optional)
See chapter “CD changer control”.
> SRC (Source)
To switch between the available audio
sources, e.g. tape, radio, CD changer
(optional).
? 1, 2, 3, 4, 5, 6 - preset buttons
You can store six stations on each FM
memory bank (I, II, T).
To store a station: Press button during
radio operation and hold down until the
radio resumes play.
To recall a station: Select the wave-
band and on FM also the desired me-
mory bank (press FM T button as many
times as required). Then press the cor-
responding preset button briefly.
Extra function:
Coding: Read chapter “Anti-theft pro-
tection” first.
Buttons 1, 2, 3, 4 - To enter the four-
digit code.
Press each of the buttons as many
times as required until the code number
given in the car radio passport stands
in the display.
@ TA (priority for traffic announcements)
If “TA” is displayed, the system will play
traffic stations only.
TA on/off: Press button.
A M•L
To select the MW or LW waveband.
Press button as many times until the
desired band is adjusted.
B FM T - FM, Travelstore
To switch between the FM memory
banks I, II and “T” (Travelstore).