Blaupunkt CANBERRA RCM 85 User Manual

Page 5

Canberra RCM 85

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

AF - Alternative frequency during RDS
operation
When “AF” lights up in the display, the
radio will automatically search for a
frequency offering better reception of
the same RDS programme.
To switch AF on/off: Press AF briefly.

Extra function:
REG ON / REG OFF - With REG ON
the system will only switch to a better
alternative frequency if the latter be-
longs to a linked station offering the
same regional programme (see “REG -
regional programme).
To switch REG on or off: Press AF until
“REG ON” or “REG OFF” appears in
the display (BEEP tone).

lo
To alter the automatic seek tuning sen-
sitivity.
If lo is displayed, the radio will only pick
up strong, local stations (low sensitivi-
ty).
If lo does not light up, the radio will also
pick up weaker, distant stations (high
sensitivity).
To switch over: Press lo briefly.
For more information, see chapter
“DSC programming”.

B/MTL
Dolby B-NR*
Press this button to play back a tape
which has been recorded with Dolby-B.
When this button is pressed, “B” lights
up in the display.

* Noise Reduction system manufactured under

license from Dolby Laboratories Licensing
Corporation. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories Licensing
Corporation.

MTL
Press when using metal or CrO

tapes.

“MTL” lights up in the display.

To switch the functions on or off:
Press the B/MTL button during tape
operation until the desired condition is
displayed.

CPS
To repeat or skip cassette titles.
To switch the function on or off: Press
CPS during tape operation.
The display shows the adjusted conditi-
on (“CPS ON/OFF”) each time the but-
ton is pressed.

Repeat titles: Press FR.
Skip titles: Press FF.

Cassette removal
Press .

Cassette loading slot
Insert tape (side A or 1 up; the open
side facing to the right).

;

Display
Radio operation:

NDR1 NDS - Station abbreviation or

frequency

- Waveband

- Memory bank (I, II, T)

- Preset button (1 - 6)
- Stereo

- Seek tuning sensitivity

- Alternative RDS frequency

- Traffic programme identifier

- Priority for traffic programme

stations

- Loudness