Summit DW18 User Manual - Manual (Page 7)

5
USA
4. LOADING THE DISHWASHER
1. Pull the handle to open the door. If
the door is opened during operation, the
dishwasher will stop running. Once the
door is closed the program will continue.
Upper rack
MODEL DEPENDING
Top rack load pattern for 8 place
settings
CAUTION
Hot steam can escape! Danger of
serious burns or other injury.
2. Remove coarse food leftovers from
tableware.
3. Now you can load the dishwasher.
Lower rack
Bottom rack load pattern for 8 place
settings
CAUTION
• Large knives and other utensils
with sharp tips and edges must
be placed horizontally into the
upper rack due to risk of injury.
Other smaller knives and sharp
utensils should be placed with
sharp side down in the cutlery
basket.
• Use extreme caution when
removing knives and other
sharp utensils from the
dishwasher. These items may
have shifted position during the
wash program, and may be wet
or slippery.
• The cup racks are designed
to support cups, glasses and
kitchen utensils. When the cup
racks are in the dishwasher do
not lean on or use the cup racks
to support your body weight.
Notice :
• Your dishwasher holds a
maximum of 8 place settings.
• Place all containers such as
cups, glasses and pots into the
dishwasher with the opening
facing downwards (so that no
water can collect).
• Small and light items can go into
the upper rack.
• Long and narrow items are placed
in the middle of the racks.
• Place all large and very dirty items
in the lower rack.
• Dishes and cutlery should not be
placed above each other.
• Glasses should not touch each
other.
• The movement of the spray arms
must not be hindered.
• Do not overload your dishwasher
and pay attention to manufacturer
instructions regarding dishes
which are appropriate for use
in for a dishwasher. Only with
suitable dishes (mentioned in
section 5) will you obtain optimal
washing results with a sensible
use of energy.