Summit DW18 User Manual - Manual (Page 29)

27
USA
Foam
Possible causes How to fix these problems
• The dishes are pre-
washed by hand with
a large amount of dish
detergent.
• Dishes do not need to be pre-washed.
Coarse dirt may be removed with a
dishcloth, or you may hold the dishes
under running water.
• Rinse aid has accidentally
leaked into the machine.
• If rinse aid has been spilled during refilling,
remove the aid using a paper cloth or
sponge.
• The cover of the rinse aid
dispenser is not closed
securely.
• Always take care to ensure that the
lid is closed after refilling the rinse aid
dispenser.
Water remains inside the machine
after the rinse cycle
Possible causes How to fix these problems
• Clogged filters. • Clean all filters as described in this
manual.
• Drain hose kinked or
clogged.
• Ensure that the drain hose is properly
placed and open.
12. TECHNICAL FEATURES
Load capacity 8 place settings
Permissible water pressure 4.35 - 145 psi (0.3 - 10 bars)
Electrical connection 120 V (volts), 12 A (amps), 60Hz (hertz)
Total power 1400 W (watts)
Heater power 1240 W (watts)
Notice :
Because we continually strive to improve our products, we may change our specifications
and design without prior notice.
This device corresponds to the following directives:
UL 749 Household Dishwasher directive.