Summit DW2432SS User Manual - Manual (Page 8)

6
4.1 UPPER RACK
Load the upper rack with dessert plates, cups,
glasses, etc.
4.1.1 HEIGHT SETTING
(DEPENDING ON MODEL)
In certain models, the height setting of the upper
rack may be changed using the wheels which
are present at two height levels.
CAUTION
Make sure that the rack is empty. Changing
the height setting while the rack contains
tableware could cause the contents to
dislodge, causing personal injury or damage
to the tableware.
1. Release the latches on both the right and left
tracks of the upper rack by turning them to the
outside (A).
2. Pull out the rack completely (B).
3. Place the rack into the tracks again at the
desired height (C).
4. Push the latches back into the correct
position.
4.1.2 VARIABLE HEIGHT SETTING
(DEPENDING ON MODEL)
The upper rack is equipped with a lifting
mechanism that enables you to change the
height of the rack even if it is fully loaded,
and without having to remove it from the
dishwasher.
LIFT UPPER RACK
1. To lift the upper rack to a higher position, hold
it on one side and carefully pull it upwards (A).
2. To lift the opposite side of the rack, hold it and
pull it upwards in the same manner.