Summit DW2432SS User Manual - Manual (Page 24)

22
Possible causes:
• Improper loading
• Wrong program selection
• Spray arms are not turning.
• Clogged filters
• Filters are not placed in their proper
positions.
• Spray arm nozzles are clogged.
• Overloaded racks
• Detergent is moist or clumping in box.
• Too little detergent
• Too little rinse aid
• The lid of the detergent dispenser
remained open.
• Washing cutlery with worn surface quality
Possible causes:
• Wrong program selection
• Detergent is moist or clumping in box.
• Using cutlery with a low surface quality
The dishes are not clean
Suggestions on how to fix this problem:
• Load the dishwasher as described in this manual.
• Select a program that washes at a higher
temperature or takes a longer amount of time.
• Check if the spray arms are blocked from moving
freely.
• Clean all filters as described in this manual.
• Check if all filters are placed in their proper
positions.
• Clean the spray arms as described in this manual.
• Do not overload the racks.
• Store detergents in a dry location. Close the lid of
the container securely.
• Increase the amount of the detergent as per the
program table.
• Increase the amount of rinse aid and/or refill the
rinse aid dispenser.
• Always ensure that you close the detergent
dispenser lid after pouring in the detergent.
• Cutlery of this type is not suited to dishwashers.
Tea, coffee or other stains
Suggestions on how to fix this problem:
• Select a program that washes at a higher
temperature or takes a longer amount of time.
• Bleaches in cleaners lose their efficiency when
stored under unfavorable conditions. Store
detergents in a dry location. Close the lid of the
container securely.
• Cleaning of these items is made difficult by their
poor surface structure. Cutlery or dishes of this type
are not for dishwashers.