Summit DW2432SS User Manual - Manual (Page 23)

21
11. TROUBLESHOOTING
What if the dishwasher will not run:
• Is the machine plugged in?
• Are all the fuses operative?
• Is the water supply fully turned on?
• Is the dishwasher door closed securely?
• Have you pressed the On/Off button?
What if the dishwasher starts but fails to circulate water within 5 seconds:
• Cancel the program by pressing the Start/Pause button for 5 seconds. See section 6 or Quick
Reference Guide .
What if the dishwasher produces poor cleaning results:
Follow instructions given on this and the following pages
Possible causes:
• Improper loading
• Too little detergent
• Dishes are removed too soon
• Wrong program selection
• Washing cutlery with worn surfaces
The dishes are not dry
Suggestions on how to fix this problem:
• Load the dishwasher as described in this manual.
• Increase the dosage amount of rinse aid and/or refill
the rinse aid dispenser.
• Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam
can escape. Begin unloading the dishwasher when
the dishes are only hand warm. Empty the lower
rack first. This cuts down on drips from dishes in the
upper rack.
• In short period programs, the wash temperature and
therefore the cleaning performance are lower.
Choose a program with a longer washing time.
• Evaporation of water is more difficult with certain
items. Cutlery and dishes of this type are not suited
for dishwashers.