Summit DW2432SS Installation Manual User Manual
Page 5
2. TOOLS THAT MAY BE NEEDED
3. MATERIALS THAT MAY BE NEEDED
(Additional materials may be required to comply with local codes)
Hot Water Supply Line – Minimum 3/8” O.D. copper tubing or metal braided
dishwasher supply line.
Electrical Supply Cable – Minimum #14AWG, 2 conductors, 1 ground, insulated
copper conductors.
90º elbow with 3/8” N.P.T male threads on one leg, and sized to fit your water
supply line (copper tubing/compression fitting, or braided hose) on the other leg.
UL-listed conduit connector or strain relief.
Teflon tape or other pipe thread compound to seal plumbing connections.
Shut-off valve and fittings appropriate for hot water supply line (copper
tubing/compression fitting, or braided hose).
Silicone
Glue
3