Summit DW2432SS Installation Manual - Manual (Page 15)

7. PLACEMENT OF DISHWASHER INTO THE OPENING
Now place the dishwasher into the opening and get ready to connect all hoses and electrical
connections.
CAUTION
Make sure all hoses and
electrical wire are pulled
through the side opening of
the cabinet, no hoses are
kinked and all slack is taken
out as shown in this figure.
7.1 DRAIN HOSE CONNECTION, WATER SUPPLY & ELECTRICAL CONNECTIONS
7.1.1 DRAIN HOSE CONNECTION
Connect the drain hose to the drain plumbing.
1. Use the supplied rubber connection hose and drain hose clamps to connect the dishwasher
drain hose to the plumbing drain connection.
2. Use the spring clamp to secure the rubber connection hose to the dishwasher drain hose. Use
the screw clamp to secure the rubber connection hose to the plumbing drain connection.
Note that the marks on the rubber
connection hose should be on the
drain hose side.
13