Summit DW2432SS Installation Manual - Manual (Page 11)

Adjust the front foot level with the adjusting
wrench to balance and raise the dishwasher to
the enclosure height.
Adjust the rear foot level with a screwdriver
to balance and raise the dishwasher to the
enclosure height.
Notice:
 Make sure the dishwasher is plumb and
notice dishwasher can be placed with a small
clearance under the counter top.
 Turning the screwdriver in the direction of
the black arrows will bring the dishwasher
back feet up.
 Turning the screwdriver in the direction of
the white arrows will bring the dishwasher
rear feet down.
6.4 INSTALLING THE SIDE TRIM
STRIPS
1. Remove the adhesive tape (Figure A).
Place the trim strips on the front edge of the
side walls (Figure B).
Notice:
 Make sure you use the correct trim strip
since there is a left and a right side strip.
The flexible material should be facing
forward (Figure B).
9