BT FREELANCE XH 2100 - Manual (Page 38)

BT Freelance XH 2100 user guide ~ 2nd Edition ~ 18th March ’04 ~ 6012
36
GENERAL
INFORMA
TION
To automatically insert a pause
after an access code
Press the
ߜ button.
You can also adjust the length
of the pause to be inserted.
There are two options available,
3 or 5 seconds to be set to suit
the switchboard:
Press the
ߜ button.
Use the DOWN button to
scroll to SETUP.
Press the
ߜ button.
Use the DOWN button to
scroll to PABX.
Press the
ߜ button.
Use the DOWN button to
scroll to PAUSE.
Display shows 3 SEC.
Use the DOWN button to
scroll to 5 SEC.
Press the
ߜ button. You will
hear a confirmation tone.
With some switchboards it
may be helpful to dial a pause
after entering the switchboard
access code, e.g. 9, 11 etc. to
enable you to get an outside
line.
This feature automatically
inserts a pause between the
access code and the telephone
number that you have entered
in the Phonebook. However
for this feature to work you
must still enter the access
code at the front of the
telephone number when
storing in the Phonebook.
Press the
ߜ button to enter
the menu.
Use the DOWN button to
scroll to SETUP.
Press the
ߜ button.
Use the DOWN button to
scroll to PABX.
Press the
ߜ button.
Use the DOWN button to
scroll to PBX 1.
Press the
ߜ button.
Display shows PIN?.
Enter PIN number.
Press the
ߜ button.
Enter the access code.
u Men
u Men
u Men
u Men
u Men
u Men
u Men
u Men
u Men
u Men
C alls
ᮢ
C
alls
ᮢ
C alls
ᮢ
C
alls
ᮢ
C alls
ᮢ
C alls
ᮢ
C alls
ᮢ