BT FREELANCE XH 2100 User Manual

Page 33

BT Freelance XH 2100 user guide ~ 2nd Edition ~ 18th March ’04 ~ 6012

ADDITIONAL

To de-register a BT Freelance
XH 2100 handset from the base

Press the

ߜ button to enter

the menu.

Use the

DOWN button to

scroll to SETUP and press the
ߜ button.

Use the

DOWN button to

scroll to DEL HS and press
the

ߜ button.

The display will show PIN?

Enter your 4-digit PIN.

Press the

ߜ button.

Use the

UP or DOWN button

to select the handset you want
to de-register (HANDSET 1-5).

Press the

ߜ button. Display

shows CONFIRM?.

Press

ߜ. You will hear a

confirmation beep.

Once de-registered, the
handset will display NOT REG.

Note

Handsets can only be de-registered
via another handset.

Note

Your 4 digit PIN number is 0000
unless you have previously allocated
a new PIN number as explained on
page 24.

Note

If the handset does not locate the
base, the handset will return to
the previous menu. Try to register
again by using a different
available base number. Ensure
that you are in close vicinity of

the base).

Men

other bases that the handset is
already registered to).

Enter the base number
(

BS 1-4) that you want to

Enter your 4-digit PIN
(original factory setting OOOO)
and press the

ߜ button.

The display will show
SEARCH 1, 2, 3, 4

and the

symbol will flash as the

handset tries to locate the base.
When the handset locates
the base, the handset will be
automatically selected and
shown on the display.

Vol

ᮢ

alls

ᮢ

alls

ᮢ