SPYPOINT HAWK User Manual - Manual (Page 10)

10
Settings
Schedule:
Allows the user to set the operation period of the camera for each day
of the week. The start and stop time programmed hours are the hours
during which the camera is in action and records photos or videos. For
example, if the user selects "15:00" start time and "19:00" stop time
on Mondays, the camera will only detect for that period of time and will
stay inactive for the remaining hours. Each day has to be configured
independently.
For a 24 hour activation, the same start and stop times must be entered
for each day of the week (example: 00:00 as start time and 00:00 as stop
time. These hours are the basic settings of the camera.)
Note: The hours are recorded over a 24-hour period. For example, 5pm
is 17:00 (00:00 means midnight).
Delay:
(10s/1m/3m/5m/10m/15m/30m)
Allows the user to choose the time interval between each detection before
the camera records the next photo or video. A longer delay minimizes the
number of photos taken and maximizes the battery life. A shorter delay
maximizes the number of photos taken but requires more battery power.
The shorter times interval are recommended when the camera is used for
security purposes.
Multi-shot:
(1/2/3/4/5/6/7/8/9/10 consecutive shots)
Takes up to 10 consecutive shots at each detection, with a 10-second
delay between each photo. This option allows the user to get up to 10
photos from different angles when the camera is in PHOTO mode.
Video length:
(10s/30s/60s/90s)
Allows the user to select the duration of the recording when the camera
is set in VIDEO mode.
Photo first:
When this option is enabled, a photo is taken immediately before each
video.
Note: The file name of the photo corresponds to the digit before the video
file name. For example, if the name of the photo is PICT001, the name of
the video will be PICT002.
Language:
(English/Français/Deutsch/Italiano/Español)
Allows the user to select a language for the camera menus.
Sensitivity:
(Low/Medium/High)
Allows the user to choose the detection sensitivity of the camera. A higher
sensitivity allows the user to take more photos.
The camera will only detect sources of heat in movement. Make sure to
have the least possible objects in front of the camera during the positioning.
This prevents the camera of taking photos when oriented towards the sun
while an object moves in front of the camera (e.g. a branch).
Date:
(MM/DD/YY, DD/MM/YY)
Allows the user to set the date as Month/Day/Year or as Day/Month/Year.
Time:
Allows the user to set the time as Hour/Minute.