Sensaphone Express II - Manual (Page 37)

35
Chapter 5: Programming
The call delay time dictates the delay before the first
call. To set the delay time between calls, see Intercall
Delay Time. This parameter may be programmed
from 0 to 12 hours. The default for the call delay
time is 30 seconds. During call delay, the unit will
announce the message locally.
6. Intercall Delay Time—If an alarm call has not
been acknowledged, the intercall delay time is the
length of time between each phone call that Express
II will wait before dialing the next phone number.
This parameter may be programmed from 0 to 12
hours. The default is
30 seconds.
Chapter 5: Programming
2) Then, enter number of times the
message will repeat itself for each call
during an alarm.
4-Maximum Number of Calls:
Return to Dial-Out menu.
1) Press 4 for MAXIMUM # OF CALLS.
2) Enter the total number of outgoing
calls alloted for an alarm.(prior to
acknowledgement)
5-Call Delay Time:
Return to Dial-Out menu.
1) Press 5 for CALL DELAY TIME.
2) Enter Hours.
3) Enter Minutes.
4) Enter Seconds.
6-Intercall Delay Time:
Return to Dial-Out menu.
1) Press 6 for INTERCALL DELAY TIME.
2) Enter Hours.
3) Enter Minutes.
4) Enter Seconds.