Sensaphone WEB600 Upgrade instructions User Manual
Page 5
WEB600 Firmware Revision History
5
• Event messages now explain to the user if an event applies to a deleted contact.
• Fixed a problem when viewing the Datalog if a zone was configured as a 4-20mA type and custom
units were configured. As a result, the timestamp would not display properly when viewing the
datalog.
• Fixed a problem where an SMS destination was deleted but events still existed. The event entry
would display improperly.
Version 1.22 (June 26, 2009)
• Added browser support for international characters.
• Fixed an issue which caused the unit to fail to respond to the Sensaphone Locator software.
• Fixed an issue where the SNMP community string on an SNMP trap was not set properly.
Version 1.21 (June 22, 2009)
• Fixed an issue which caused SNMP to fail when both DHCP and SNMP were enabled
simultaneously.
Version 1.20 (June 16, 2009)
• Fixed an issue when e-mail addresses were greater than 32 characters.
Version 1.19 (June 12, 2009)
• Fixed a slow connection problem when the Ethernet mode was set to “Auto” and the physical
connection was lost.
• Fixed a periodic reboot issue.
• Fixed a programming upload issue
Version 1.18 (June 5, 2009)
• Fixed a problem when saving network settings.
• Fixed a problem when setting input and contact schedules.
Version 1.16 (June 1, 2009)
• Fixed a storage problem with the Event Logger.
• Made several security enhancements.
• Updated the SNMP functionality.
Version 1.15 (April 30, 2009)
• Changed the default Ethernet mode from 100Mbps to Auto.
Version 1.13 (April 14, 2009)
• Fixed an issue when using Internet Explorer which caused an error when trying to program Contact
information.
• Changed the way the Datalog and Eventlog CSV Export is provided to the browser.
Version 1.12 (March 23, 2009)
• When using a portable device, the web page now supplies links to WAP & PDA pages if not
automatically directed.
Version 1.11 (March 18, 2009)
• First production version.