Package contents, Installation instructions – Schroth Racing QuickFit And QuickFit Pro BMW E82 / E92 / E92 LCI User Manual
Page 4
4
PACKAGE CONTENTS
The contents of each package is as detailed in the table
below for each belt.
BMW Rallye 4 Left
BMW Left Belt
1x
Left side lap belt connector
1x
Left side tail strap connector 1x
Reduction collar
2x
SCHROTH asm sticker
1x
SCHROTH Racing sticker
1x
BMW Rallye 4 Right
BMW Right Belt
1x
Right side lap belt connector 1x
Right side tail strap connector 1x
Reduction collar
2x
SCHROTH asm sticker
1x
SCHROTH Racing sticker
1x
All BMW Rallye 4 belts re-use factory mounting
bolts for the outside lap belt mounting points
and Schroth provided replacement bolts for the
outside rear mounting points
MANUFACTURING INFORMATION
Each SCHROTH belt is manufactured to exacting standards.
Specific manufacturing information of each belt is printed on
the back side of the plastic asm cartridge cover.
US Version asm cover
Type of belt
FMVSS Certification
Importer
Date of manufacture
Product number
Always keep this manual in the vehicle so that others can
thoroughly familiarize themselves with the proper use of
the system.
INSTALLATION INSTRUCTIONS
1 General Instructions
Always leave original equipment seat belts in place and
available for use.
We strongly recommend that you leave in place all BMW
factory provided 3-point restraint systems originally supplied for
the front and rear seating positions of your vehicle when you
install the SCHROTH asm harnessbelt. Removal of original
equipment restraint systems may also violate applicable State
or Federal law.
To carry rear seat passengers, you must use your standard 3-
point factory provided front seat belts. To use the factory
installed seat belts after a SCHROTH BMW Rallye 4 belt has
been installed you must first release (un-clip) all four points of
the SCHROTH belt and remove it.
Leaving original equipment restraint systems in place and fully
functional will enable you to choose either the SCHROTH
Rallye 4 OR the vehicle’s standard seat belts when it is
necessary to transport passengers in any of the rear seats or
when either harness belt is not suited for use by the driver or
front seat passenger.
When using the SCHROTH harnessbelts, folding front seat
backrests will be restricted in their range of motion.
Evacuation or rescue of rear seat passengers can be
restricted or even impossible after an accident and severe
injuries or death may occur. DO NOT CARRY REAR SEAT
PASSENGERS WHEN USING SCHROTH RALLYE BELTS.
Separate SCHROTH asm harnessbelts are supplied for the
left and right sides. The black “asm cartridge” must be on
the inboard shoulder strap when system is installed (see
illustration). Never install a belt on wrong side of vehicle.
System will not function properly in an accident and
serious injury or death may occur.