Schroth Racing Rallye Cross - Manual (Page 2)

This manual contains important information as well as
WARNINGS, CAUTIONS and NOTES regarding the proper
installation, effective use and maintenance of the
SCHROTH harnessbelt. Please be sure to read and
thoroughly understand its contents before beginning
installation and before using the system. Follow all
instructions and Notes carefully and be especially sure to
heed all Warnings and Cautions.
Always keep this manual in your car for reference and be
sure to leave it with the car if you sell it with the harness
belt system installed. If you lose the manual please write
Schroth Restraint Systems in Germany or your importer
and request a free replacement.
Warnings look like this:
W A R N I N G !
WARNINGS deal with important points about
installation, misuse or modification of the harness
belt system. Ignoring these Warnings will create
serious danger for you which can lead to serious
personal injury or death.
Cautions look like this:
C A U T I O N !
CAUTIONS deal with important points to observe to
prevent damage to your harness belt system or to your car.
Damage to either can reduce the effectiveness of the
system or lead to expensive repairs.
Notes look like this:
Note:
Notes contain important tips to help you install effectively use
and maintain the harness belt system.
INSTALLATION and OPERATING
INSTRUCTIONS
Harnessbelt System US-models
Tested in accordance with applicable
pro-visions of FMVSS
209
Made in Germany by: Imported by:
SCHROTH Safety Products GmbH MDI Inc.
Post Office Box 2440 3 First Avenue
D-59714 Arnsberg, Germany Peabody, MA 01960
Phone +49-2932-9742-0 Phone (978) 532-1145
Fax +49-2932-9742-45 Fax (978) 532-2016
Toll Free (888) 536-8550
Congratulations!
With the purchase of this SCHROTH asm harnessbelt, you
have chosen a sophisticated restraint system which represents
a further advance in harness restraint technology. Extensive
research, testing and field experience has shown it to offer,
when properly installed and worn, high levels of protection in
head-on collisions.
SCHROTH harnessbelt systems are only intended for
installation at the left and right outboard front seating positions
of passenger cars which have been specifically evaluated by
SCHROTH engineers for anchor point locations and suitability
of available front seats.
Before attempting installation, please first answer the following
questions and carefully follow the instructions which accompany
them.
W A R N I N G !
Restraint systems can only offer protection if they
are properly installed and used.
To assure proper function, your car must meet
special technical requirements.
Before installation of SCHROTH harnessbelt, please
answer a few very important questions to make sure
the SCHROTH harnessbelt system can be properly
installed and effectively used in your car.
1. Is your vehicle listed in the Vehicle Reference List? (See
yellow pages.)
Compare your car’s specifications to the Make, Type No. and
Model Year of vehicle in the Vehicle Reference List.
YES NO
W A R N I N G !
Proper harness belt geometry requires that seat belt
anchor points be located within narrowly defined
areas. Therefore SCHROTH harnessbelts may only
be installed in SCHROTH approved vehicles for
which proper anchorage location and belt geometry
has been determined to exist.
1