Buffalo Technology WHR-HP-AG108 - Manual (Page 4)

Step 2: Configure Your Router
Next, you need to configure your router. This is done from a web browser on a computer
connected to the router. Using a computer that is connected directly to the AirStation with an
Ethernet cable is recommended.
1
. Launch the web browser on the computer that you’re going to use to configure the AirStation.
NOTE: The computer used to configure the AirStation should be set to obtain an IP address
automatically from a DHCP server. This is the default Windows setting.
2
. Your web browser should automatically attempt to load a web page. If the default web page
loads then the AirStation has automatically configured your Internet connection settings. You
are now connected to the internet! Please turn to page 5.
3
. If the AirStation cannot automatically configure itself for
your Internet Connection, then a window will open, prompting
you to enter a User ID and Password.
NOTE: If your web browser doesn’t automatically connect you
to the AirStation Configuration Utility, then type 192.168.11.1
in its address field and press Enter on your keyboard. Logon
details are as follows:
User name: root
Password: Leave this field blank
4
. The AirStation will provide different configuration options depending on what it has auto-
detected. Please enter specific connection information as necessary.