Blaupunkt RDM 169 US - Manual (Page 28)

28
Selecting a quality factor for the bass
or mid-range
• Press / repeatedly until “LO-Q-
FAC” or “HI-Q-FAC” appear in the dis-
play.
• Press << or >> once or several times
in order to set the quality factor (Q-
FACT 1 to Q-FACT 3).
• Press / to save the selected factor
and return to the DPE main menu.
Or
• Press DPE or EXIT to save the select-
ed factor and to close the DPE main
menu.
Selecting the preset sound setting:
Selecting a preset influences the equalizer
and sound settings of the unit.
Each selected preset can be adjusted man-
ually. When a different preset is selected,
however, the factory default setting is re-
stored. Your personal sound settings for
BASS, TREBLE, EQ and LD are stored in
the “USER” preset mode.
To call up the presets:
•
Press / repeatedly until “PRESET”
appears on the display.
• Press << or >> once or several times
to select the (*USER* >> LINEAR >>
ROCK >> DISCO >> JAZZ >>
CLASSIC >> VOCAL) equalizer set-
ting.
• Press / to save the selected equal-
izer setting and return to the DPE main
menu.
Or
• Press DPE or EXIT to save the select-
ed equalizer setting and to close the
DPE main menu.
Equalizer setting
To activate/deactivate the equalizer, hold
DPE down for approx. 2 seconds.
This enables you to compare the sound with
and without equalizer.