Blaupunkt RDM 169 US - Manual (Page 23)

23
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Selecting CD and track
You can select CDs, tracks and parts of
tracks conveniently using the rocker. CDs
can be selected only if a changer is fitted.
<> Select CD (changer mode only)
>>
Up: Press briefly
<< Down: Press briefly
/ Select track
Up: Press briefly
CUE - fast forward (audible): Keep
depressed
Down: Press twice or more in quick
succession
Replay track from beginning: Press
briefly
REVIEW - fast rewind (audible): Keep
depressed
The rocker acts as a sequence switch:
pressing it repeatedly causes several CDs
or tracks to be skipped.
Selecting the display type
You can switch the display type over in CD
and changer replay mode:
• Press DIS repeatedly until the desired
display type is selected.
“CD 10” – CD number (appears in
changer mode only)
“TRACK 13” – track number
“14:34” – Time
“00:20” – Time played
“VIVALDI” – CD name
The name of the CD can be displayed only
if a name has been entered.
Refer to the “Assigning names to CDs” sec-
tion below.
Repeating a track/CD
You can repeat a track or (in changer mode)
a CD continually.
You can select the following functions us-
ing the RPT key:
- REP TRCK = Repeat track
- REP CD = Repeat CD (only in changer
mode)
- RPT OFF = Deactivate function.
• Press RPT repeatedly until the desired
function is activated.
The track or the CD is played repeatedly until
you switch to “RPT OFF” using RPT.
TPM (Track Program Memory)
For storing and playing preferred tracks in
CD and CD changer mode. Up to 30 CDs
can be managed in CD mode and 99 CDs
in changer mode with a maximum of 40
tracks per CD. TPM is active only in the
mode in which the track program was stored
(CD or changer mode).
CD mode/CD changer mode