S&S Cycle T111 Engine Assembly - Manual (Page 3)

1- Introduction
S&S
® T111 Engines are designed and intended for
installation in a stock Harley-Davidson ® Twin Cam 88 ®
chassis. It will bolt directly to the stock transmission and
engine mounts of chassis designed for stock Twin Cam 88
®
engines. The T111 Engine is available in silver powder
coat or black powdercoat finish.
Installation can be performed by any Harley-Davidson ®
repair shop equipped to do complete engine overhauls.
No special tools other than those used in normal engine
building operations are required.
NOTES
G Installation of a fuel injected engine in a motorcycle that
was originally equipped with a carburetor is fairly difficult
and expensive. This conversion requires a fuel pump
equipped gas tank as well as wiring harness.
G All S&S T111 assemblies are for Twin Cam 88
® non-
counterbalanced engine applications, and are not for use
in Twin Cam 88B
® counterbalanced applications.
3
7- Oil Line Installation
8- Exhaust System
9- Initial Start-up and Engine Break-In
10- Tuning Guidelines
11- Engine Specs and Torque Values
12- Service Intervals
Instruction Contents:
1- Introduction
2- Additional Features
3- Modification Notes
4- Engine to Frame Assembly
5- Ignition System
6- Fuel System
Please read these instructions carefully before starting work. Proceed with the installation only after the instructions are
completely understood. These instructions should be supplemented by the appropriate OEM service manual for your
motorcycle. Follow all safety information.