S&S Cycle T111 Engine Assembly - Manual (Page 11)

12- Press the oil line retention plates into place until
they seat. Install the two screws ( 5 ⁄
16
-18 x 3 ⁄
4
button
head) through the oil line retention plates. First
screw goes in the transmission top cover and the
second mounts into the crankcase near the rear
motor mount. Treat both screws with blue
threadlock and tighten to 18-ft-lbs.
13- Tighten transmission top cover screws to 100-120 in-lbs.
14- Install the vent line (S&S PN 50-8291) with clamps
(S&S PN 50-8156).
15- Reconect neutral switch wires.
16- Check function of neutral switch.
11
S&S ® Replacement Parts for Harley-Davidson ® Dyna ® Models
1- Plate ........................................................................106-1176
2- Seal (4 pack) .............................................................106-1177
3- BHSHCS 5 ⁄
16
-18 x 3 ⁄
4
(10 pack) ....................................106-1178
4- Washer (4 pack) .......................................................106-1185
5- Line, oil supply .........................................................31-0447
6- Line, oil return..........................................................31-0048
7- Line assembly, oil feed.............................................31-0449
8- Top cover ..................................................................56-1615
9- SHC - 1 ⁄
4
-20 x 1 1 ⁄
2
” (10 pack) ......................................106-1179
10- SHC - 1 ⁄
4
-20 x 2 1 ⁄
4
" (10 pack) ......................................106-1180
11- SHC - 1 ⁄
4
-20 x 1 3 ⁄
4
" (10 pack) ......................................106-1181
12- SHC - 1 ⁄
4
-20 x 1 1 ⁄
4
" (10 pack) ........................................50-0330
13- Gasket, tranny top cover.........................................56-1261
14- Drill Template .........................................................106-1188
15- Fitting
(5 pack) ........................................................106-1182
16- Hose, 90-degree bend .............................................50-8292
17- Clamp
(10 pack) .........................................................50-8156
18- Plug, pipe (10 pack) .................................................106-1175
19- O-ring (10 pack) .......................................................106-1183
20- Fitting (2 pack) ........................................................106-1173
11
14
1
12
9
18
7
14
13
8
3
4
2
4
1
3
5
19
20
16
6
17
15
17
10