S&S Cycle Lloydz Motorworkz 107 and 114 Big Bore Kit for Victory Motorcycles - Manual (Page 6)

6
4- With the front piston on your work bench install one of the piston pin clips into the piston on the cam chain side. Make sure the piston pin clip
opening is facing up when installed.
5- Lightly oil the piston pin, piston pin bore and upper connecting rod bushing with clean Victory® 20W-40 motor oil.
6- Hold the piston over the connecting rod with the piston facing the correct direction and the piston pin bore and upper bushing bores lined up.
7- Install the piston pin through the piston pin bore and through the connecting rod bushing until the pin contacts the clip.
8- Install the other piston clip with the opening facing up. Ensure that both clips are fully seated.
REAR PISTON INSTALLATION
1- The rear piston is notched for piston to piston clearance and must be assembled with the notch facing the front of the engine as illustrated in
Picture 7.
2- Lightly oil the piston pin, piston pin bore and upper connecting rod bushing with clean Victory® 20W-40 motor oil.
3- Hold the piston over the connecting rod with the piston facing the correct direction and the piston pin bore and upper bushing bores lined up.
4- Install the piston pin through the piston pin bore and through the connecting rod bushing until the pin contacts the clip.
5- Install the other piston clip with the opening facing up. Ensure that both clips are fully seated.
Fr
on
t
Rear
Picture 7
Rear Piston Notch