beautypg.com

S&S Cycle 114 Big Bore Kit for Victory Motorcycles User Manual

Page 7

background image

7

4- With the front piston on your work bench install one of the piston pin clips into the piston on the cam chain side. Make sure the piston pin clip

opening is facing up when installed.

5- Lightly oil the piston pin, piston pin bore and upper connecting rod bushing with clean Victory® 20W-40 motor oil.
6- Hold the piston over the connecting rod with the piston facing the correct direction and the piston pin bore and upper bushing bores lined up.
7- Install the piston pin through the piston pin bore and through the connecting rod bushing until the pin contacts the clip.
8- Install the other piston clip with the opening facing up. Ensure that both clips are fully seated.

Picture 6

Picture 7

Fr

on

t

Rear

This manual is related to the following products: