S&S Cycle Teardrop Air Cleaner Kit (PN 106-5795) for 2010-Up Honda Fury 1300 Motorcycles - Manual (Page 4)

4
Note: The hose clamp has a locating tab on the rubber boot. Make sure the clamp is positioned in this tab. Rotate the rubber boot until the hose clamp
is in an upright position as it was when removed from the bike originally. See Picture 8 and 9.
9- Assemble the 3 standoffs in the aluminum back plate as shown, making sure to place the shortest standoff towards the narrow end of the
back plate. Use the 3 LSHC, 1/4-20 x 1/2 screws. Apply a small amount of blue thread locker to the screws. Torque the screws to 40-45 in-lbs.
See Picture 10.
10- Install the mounting bracket using the supplied 1/4-20 x 5/8” bolts. Apply a small amount of blue thread locker to the bolts and torque to 80-90
in-lbs. See Picture 11.
Picture 8
Picture 10
Picture 11
Picture 9
Short Stand-off
Hose clamp tab