S&S Cycle TÜV Long Block - Manual (Page 11)

11
113 Cubic Inch Engine Specifications
ENGINE IGNITION SYSTEM
Number of Cylinders ............................................... 2 Timing ........................ 28
°
to 32
°
bTDC Full Advance
Type ................................................... 4-Cycle, 45
°
V ................................................................................
Compression Ratio ............. Normal Altitude: 9.0 to 1 1 Spark Plug Type .......... Champion RN12YC or Equiv.
Dry Weight ..................................... ~ 165 lbs. (75 kg) Size .............................................. 14 mm, w/Washer
Bore ............................................. 4 inch (101.6 mm) Gap ..................... 0.040 to 0.045 inch (1 to 1.1 mm) 11
Stroke ..................................... 4-1/2 inch (114.3 mm) VALVE TRAIN
Displacement (cubic inch) ............................. 113.1 ci Rocker-Arm Ratio ...................................... 1.625 to 1
Displacement (cubic centimeters) .............. 1,853.3 cc Intake Valve Diameter ........... 2.000 inches (50.8 mm)
................................................................................. Exhaust Valve Diameter ....... 1.605 inches (40.8 mm)
................................................................................. Peak Valve Lift ..................... 0.520 inches (13.2 mm) 1
FUEL SYSTEM ........................................................ Intake ............................................. Open - 0
°
bTDC 1
Carburetor .. Super G (Butterfly, 2-1/16" (52.3 mm) Bore) .................................................... Close - 40
°
aBDC 1
Fuel ......... Unleaded Gasoline: 91 Octane Minimum Exhaust ........................................ Open - 50
°
bBDC 1
Warm Idle Speed ......................... 900 +/- 100 RPM ...................................................... Cloce - 2
°
aTDC 1
................................................................................. (Open/Close Timings @ 0.053 inch (1.346mm) Follower Lift)
1 These specifications may change to optimize engine performance and maintain low emissions.