Belkin PM01122EA - Manual (Page 70)

68
N Wireless Router
sections table of contents 1 2 3 4 5 6 8 9 10 7
MaNUally CoNfIgURINg NeTWoRK seTTINgs
Manually Configuring Network settings in Windows 98 or Me
5� Click the “Gateway” tab (2). Write the gateway address down in
the chart.
(1)
(2)
(3)
3� If “Specify and IP address” is selected, your Router will need
to be set up for a static IP connection type. Write the address
information in the table below. You will need to enter this
information into the Router.
7� If not already selected, select “Obtain IP address automatically” on
the IP address tab. Click “OK”.
Restart the computer� When the computer restarts, your network
settings are now configured for use with the Router�
1� Right-click on “My Network Neighborhood” and select “Properties”
from the drop-down menu.
2� Select “TCP/IP -> settings” for your installed network adapter.
You will see the following window.
4� Write the IP address and subnet mask from the “IP Address”
tab (3):
6� Click the “DNS Configuration” tab (1). Write the DNS address(es)
in the chart.